Master Catalog Page 475 FITŪ Heat-Shrink Tubing

Alpha Wire www.alphawire.com 1-800-52 ALPHA Specifications subject to change. For complete specifications and availability, visit www.alphawire.com. 475 FIT > FIT-PRINT Heat-Shrinkable Identification System Heat-Shrink Tubing FIT-PRINT Heat-Shrinkable Identification System 3:1 Shrink Ratio, XLPO UL 224 CSA 198 MIL-STD-202F Method 215J Permanent, smear-resistant marking Identification for cable or harness assemblies Operating Temperature -30C to +105C Shrink Temperature 90C min. 125C full recovery Material Cross-linked polyolefin Colors White, yellow Physical Properties Tensile strength: 1160 psi (8.0 N/mm 2 ) Elongation: 150% min Longitudinal change: 20% Flame retardant Shelf life: 3 years at 18C to 35C Chemical Properties Corrosive effect: none Fungus resistance: no growth Water absorption: 0.5% Electrical Properties Dielectric strength: 20 V/mil (7.9 kV/cm) Volume resistivity: 10 14 ohm-cm Availability 250 tubing pieces per package Part No Range Supplied ID, Min. Recovered ID, Max. Recovered Wall Thickness, Nom. AWG Inch mm Inch mm Inch mm Inch mm FIT-PRINT-1/8 22 - 16 0.344 - 1.374 8.74 - 34.90 0.125 3.18 0.042 1.07 0.023 0.58 FIT-PRINT-1/4 16 - 8 1.374 - 3.264 34.90 - 82.92 0.250 6.35 0.083 2.11 0.023 0.58 FIT-PRINT-1/2 8 - 2 3.264 - 6.543 82.92 - 166.19 0.500 12.70 0.166 4.22 0.023 0.58 FIT-PRINT-1 2 - 4/0 6.543 - 10.2 166.19 - 259.08 1.000 25.40 0.333 8.46 0.023 0.58 To economically meet the wire identification needs of the electronic interconnect, industrial, computer office automation, marine, and electrical markets, FIT-PRINT sleeves allow smear- resistant, permanent identification. The sleeves, available in white or high-visibility bright yellow, feed directly into dot matrix printers (high carbon content ribbon recommended). A standard ball- point pen may also be used.

Previous Page
Next Page